HOWTO

Configuration of a Nokia WLAN phone for usage with SwyxWare (kb3343)

The information in this article applies to:

  • SwyxWare v6.20
  • SwyxWare v6.12
  • SwyxWare v6.11
  • SwyxWare v6.10
  • SwyxWare v6.02
  • SwyxWare v6.01

[ Summary | Information ]


Summary

This article describes how to configure a Nokia WLAN phone for usage with SwyxWare.
This requires SwyxWare version 6.01 with Maintenance Pack 3, or higher.

For information on the features available on some Nokia WLAN phones in connection with
SwyxWare, please refer to the following article: General information on SIP devices/endpoints (kb2898)


Information

1. SwyxWare Configuration

Start the SwyxWare Administration and open the server properties.

img-478
Click to enlarge...

Open the on the "Preferences" tab and make sure that the field
"Default Realm for SIP Devices" does not contain any capital letters.

SwyxServer - Properties
SwyxServer - Properties
Click to enlarge...

Close the server properties and create a SwyxWare User for the telephone.
In this example, the user name for the phone is "e61". Please make sure that
the user name and the user ID are identical.

SwyxWare e61 User - SIP Settings
SwyxWare e61 User - SIP Settings
Click to enlarge...

This concludes the first configuration part in SwyxWare.

2. Nokia Configuration

For the configuration of a Nokia WLAN phone, you need a WLAN connection.
When you have made sure your WLAN connection is functioning, move to the
following menu: Menu -> Tools -> Settings -> Connection

Nokia e61 - Connection Menu
Nokia e61 - Connection Menu
Click to enlarge...

Select the option "SIP Settings".

Nokia e61 - SIP Settings
Nokia e61 - SIP Settings
Click to enlarge...

Create a new SIP profile here.

Nokia e61 - Add SIP profile
Nokia e61 - Add SIP profile
Click to enlarge...

Nokia e61 - SIP Profile name
Nokia e61 - SIP Profile name
Click to enlarge...

You can choose any name as "Profile name", e.g. "SwyxSip". The "Service profile"
must be set to "IETF". Under "Default access point", select the WLAN access you
want to use for this SIP connection.

Nokia e61 - SIP Public user name
Nokia e61 - SIP Public user name
Click to enlarge...

Use a SIP URI of the following form as "Public user name":
<SwyxWare User ID>@<name of the SwyxServer computer>
e.g.: e61@dqa-hera01

IMPORTANT
Please note that the telephone is case sensitive - i.e. make sure that you
use the correct case when you enter the User ID and the computer name.

You can activate the option"Use compression" as required. If activated,
G.729 is used for voice compression, instead of G.711.

Under "Registration", you can specify, if a SIP connection should be
established as necessary only (outgoing call), or if you want
a permanent connection.

Nokia e61 - SIP Registrar
Nokia e61 - SIP Registrar
Click to enlarge...

You do not need to configure a proxy server, it is sufficient to set up a
Registrar. To do this, select "Registrar server".

Nokia e61 - SIP Registrar Settings
Nokia e61 - SIP Registrar Settings
Click to enlarge...

Enter the computer name of the SwyxServer under "Registrar serv. addr."
and under "Realm". Please note, that these fields are case sensitive.
Fill in "User name" and "Password" with the data you used for SwyxWare.

Nokia e61 - SIP Registrar Settings
Nokia e61 - SIP Registrar Settings
Click to enlarge...

Select "UDP" as "Transport type" and use the default value "5060"
as "Port". Save this SIP profile by choosing three times "Back"
(bottom right on the display). You are now in the Connection menu.

Nokia e61 - Connection Menu
Nokia e61 - Connection Menu
Click to enlarge...

Select the option "Internet tel. settings" and create an Internet Telephony profile.

Nokia e61 - Internet Telephony Profiles
Nokia e61 - Internet Telephony Profiles
Click to enlarge...

Nokia e61 - Add Internet Telephony Profile
Nokia e61 - Add Internet Telephony Profile
Click to enlarge...

Nokia e61 - Internet Telephony Profile
Nokia e61 - Internet Telephony Profile
Click to enlarge...

You can choose any "Name" e.g. "SwyxDefault".
Under "SIP profiles", select the SIP connection to be associated with this
telephony profile. Save this profile by choosing "Back" (bottom right at the display).

This concludes the configuration. 

3. How to make a VoIP call?

To make a VoIP call, simply enter a number and choose "Select"
(bottom left at the display) -> Call -> Internet Call.

Nokia e61 - Make a VoIP call
Nokia e61 - Make a VoIP call
Click to enlarge...

Nokia e61 - Make a VoIP call
Nokia e61 - Make a VoIP call
Click to enlarge...


Comment

Comment on this article



If we have any follow-up questions, where can we contact you?

E-Mail Address (optional)


Note

This feedback form can't be used for support requests. Those requests must be directed to your Swyx reseller or distributor.